ST SR6PX-EVBC4000P

From SEGGER Wiki
Revision as of 11:29, 15 May 2024 by Simon Buchholz (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

This article describes specifics for the ST SR6PX-EVBC4000P evaluation board.
ST SR6PX-EVBC4000P SR6P3C4 board.jpg

Preparing for J-Link

  • Connect the J-Link to P1.
  • Power the board via J1 (12V).
  • Verify the Connection with e.g. J-Link Commander. The output should look as follows:

ST SR6PX-EVBC4000P SR6P3C4 connect.png

Retrieved from "https://wiki.segger.com/index.php?title=ST_SR6PX-EVBC4000P&oldid=19241"