TWR-KV58F220M
Revision as of 13:17, 15 May 2024 by Simon Buchholz (talk | contribs)
Contents
Enable external debug access
The TWR-KV58F220M eval board supports to connect an external J-Link for debugging. However, by default the board is shipped in a configuration where connecting an external J-Link is not possible. This is because the OpenSDA circuit permanently drives the SWCLK and SWDIO pins.
In order to enable external debug access, J19 and J20 need to be open. This isolates the OpenSDA circuit from the target MCU.