Renesas RX66T
Revision as of 13:28, 15 May 2024 by Simon Buchholz (talk | contribs)
This article describes device specifics of the Renesas RX66T series microcontrollers.
Requirements
- J-Link software V6.47e or later: Download
Programming of the internal code flash, data flash and option-setting memory has been verified with the following J-Flash project and data files:
Option-setting memory
Programming the option setting memory at addr. 0x12_0040 is supported.
User boot area
Programming of UB code A and UB code B in user boot area at 0xFF7F_FFE8 is not suppored
Supported debug interfaces
The following debug interfaces are supported for the RX66T series:
- JTAG
- FINE