IMX6UL-EVK

From SEGGER Wiki
Revision as of 13:15, 15 May 2024 by Simon Buchholz (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Enable debugging via JTAG

In order to use the enable to pins of the JTAG connector of the IMX6UL-EVK eval board, the following resistors need to be desoldered:

  • R1407
  • R1431-1434

and the following resistors need to be assembled:

  • R1912-14
  • R1916
Retrieved from "https://wiki.segger.com/index.php?title=IMX6UL-EVK&oldid=19357"