NXP RD-RW616-BGA IPA-2A/1A

From SEGGER Wiki
Revision as of 15:44, 24 August 2023 by Torben.scharping (talk | contribs) (→‎SETUP)
Jump to: navigation, search

This article describes specifics for the NXP RD-RW616-BGA_IPA-2A/1A evaluation board.
NXP RD-RW612-BGA RW612EV board.jpg

Preparing for J-Link

  • Connect the J-Link to P2
  • Power the board via J1
  • Jumper JP1 must be set in order to use J-Link
  • Verify the Connection with e.g. J-Link Commander. The output should look as follows:

NXP RD-RW612-BGA RW612EV connect.png

Example Project

The following example project was created with the SEGGER Embedded Studio project wizard and runs out-of-the-box on the NXP RD-RW616-BGA_IPA-2A/1A.
It is a simple Hello World sample linked into the internal flash.

SETUP

Retrieved from "https://wiki.segger.com/index.php?title=NXP_RD-RW616-BGA_IPA-2A/1A&oldid=16151"