MindMotion FTHR-G0001

From SEGGER Wiki
Revision as of 14:01, 8 September 2023 by Torben.scharping (talk | contribs) (Created page with "__TOC__ This article describes specifics for the MindMotion FTHR-G0001 evaluation board.<br> 450px == Preparing for J-L...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

This article describes specifics for the MindMotion FTHR-G0001 evaluation board.
450px

Preparing for J-Link

  • Connect the J-Link to CN2.
  • Power the board via USB-C.
  • Verify the Connection with e.g. J-Link Commander. The output should look as follows:

MindMotion FTHR-G0001 MM32G0001A1T connect.png

Example Project

The following example project was created with the SEGGER Embedded Studio project wizard and runs out-of-the-box on the MindMotion FTHR-G0001 .
It is a simple Hello World sample linked into the internal flash.

SETUP

Retrieved from "https://wiki.segger.com/index.php?title=MindMotion_FTHR-G0001&oldid=16261"