TM4C123G LaunchPad
Revision as of 14:38, 15 May 2024 by Simon Buchholz (talk | contribs)
The TI TM4C123G LaunchPad evaluation board does not come with an external debug connector. Therefore, in order to use an external debug probe like the J-Link, at the first, the Tiva C Series TM4C123G LaunchPad board needs to be manually setup:
- Solder a strip header to DBG (see image below)
- Connect the debug interface signals manually (e.g. using jumping wires) as described in the table below
|