LPCXpresso V2/V3 based boards
Revision as of 11:41, 16 May 2024 by Simon Buchholz (talk | contribs)
Using LPC-Link 2 on LPCXpresso V2/V3
For the LPCXpresso V2/V3 and the LPC-Link 2 is a firmware available which allows to "convert" the on-board LPC-Link to a J-Link OB so an external debug probe is not necessary. For further information please refer to our website: https://www.segger.com/lpc-link-2.html