NXP X-FRDM-MCX W7x
Revision as of 09:16, 26 June 2024 by Torben.scharping (talk | contribs) (Created page with "Category:Evalboards __TOC__ This article describes specifics for the X-FRDM-MCX W7x evaluation board.<br> 450px == Preparing...")
This article describes specifics for the X-FRDM-MCX W7x evaluation board.
Preparing for J-Link
- Connect the J-Link to J12.
- Power the board via J10.
- Verify the Connection with e.g. J-Link Commander. The output should look as follows:
Example Project
The following example project was created with the SEGGER Embedded Studio project wizard and runs out-of-the-box on the X-FRDM-MCX W7x.
It is a simple Hello World sample linked into the internal flash.
SETUP
- Embedded Studio: V7.20
- Hardware: NXP X-FRDM-MCX W7x
- Link: File:NXP MCXW71 TestProject ES 7V20.zip