Difference between revisions of "Analog ADuCM355"
(Created page with "__TOC__ Analogs Devices ADuCM355 is an ARM Cortex-M3 based MCU which controls and measures electrochemical sensors and biosensors. The device features current, voltage, and im...") |
(→Internal Flash) |
||
Line 5: | Line 5: | ||
===Supported Regions=== |
===Supported Regions=== |
||
*Internal flash (0x00000000 - 0x0001FFFF) |
*Internal flash (0x00000000 - 0x0001FFFF) |
||
+ | NOTE: Right now, the J-Link software assumes the flash as one sector because it seems that erase chip is the one and only reliable solution in order to perform a erase and to make sure that following flash operations (e.g. program are working as expected). |
||
+ | |||
==Reset== |
==Reset== |
||
The device has a ROM code which needs to be run after reset. The J-Link halts the MCU after executing the ROM code but before starting the application. |
The device has a ROM code which needs to be run after reset. The J-Link halts the MCU after executing the ROM code but before starting the application. |
Latest revision as of 14:37, 16 October 2020
Analogs Devices ADuCM355 is an ARM Cortex-M3 based MCU which controls and measures electrochemical sensors and biosensors. The device features current, voltage, and impedance measurement capability.
Internal Flash
Supported Regions
- Internal flash (0x00000000 - 0x0001FFFF)
NOTE: Right now, the J-Link software assumes the flash as one sector because it seems that erase chip is the one and only reliable solution in order to perform a erase and to make sure that following flash operations (e.g. program are working as expected).
Reset
The device has a ROM code which needs to be run after reset. The J-Link halts the MCU after executing the ROM code but before starting the application.
Evaluation Boards
TBD
Example Application
TBD