Difference between revisions of "Analog ADuCM430"
(Created page with "__TOC__ This article describes the device specific handling for Analog Device's ADuCM430 family which is based on Cortex-M3. ==Flash Banks== ===Internal Flash=== {| class="se...") |
(→Evaluation Boards) |
||
Line 15: | Line 15: | ||
The J-Link software performs a device specific reset which ensures that the MCU is not halted after the boot ROM has been executed but before starting the user application code. |
The J-Link software performs a device specific reset which ensures that the MCU is not halted after the boot ROM has been executed but before starting the user application code. |
||
==Evaluation Boards== |
==Evaluation Boards== |
||
− | *Analog |
+ | *Analog Devices EV-ADuCM340ARDZ: http://wiki.segger.local/Analog_Devices_EV-ADuCM340ARDZ |
+ | |||
==Example Application== |
==Example Application== |
||
*Analog Device EV-ADuCM340ARDZ: http://techwiki.segger.local/Analog_Device_EV-ADuCM340ARDZ#Example_Project |
*Analog Device EV-ADuCM340ARDZ: http://techwiki.segger.local/Analog_Device_EV-ADuCM340ARDZ#Example_Project |
Revision as of 11:41, 10 February 2023
Contents
This article describes the device specific handling for Analog Device's ADuCM430 family which is based on Cortex-M3.
Flash Banks
Internal Flash
Base address | Size | J-Link Support |
---|---|---|
0x00000000 | Up to 1 MB |
Device Specific Handling
Reset
The J-Link software performs a device specific reset which ensures that the MCU is not halted after the boot ROM has been executed but before starting the user application code.
Evaluation Boards
- Analog Devices EV-ADuCM340ARDZ: http://wiki.segger.local/Analog_Devices_EV-ADuCM340ARDZ
Example Application
- Analog Device EV-ADuCM340ARDZ: http://techwiki.segger.local/Analog_Device_EV-ADuCM340ARDZ#Example_Project