Difference between revisions of "Analog ADuCM430"
(→Example Application) |
|||
Line 1: | Line 1: | ||
__TOC__ |
__TOC__ |
||
− | This article describes the device specific handling for Analog |
+ | This article describes the device specific handling for Analog Devices ADuCM430 family which is based on Cortex-M3. |
==Flash Banks== |
==Flash Banks== |
Revision as of 11:41, 10 February 2023
Contents
This article describes the device specific handling for Analog Devices ADuCM430 family which is based on Cortex-M3.
Flash Banks
Internal Flash
Base address | Size | J-Link Support |
---|---|---|
0x00000000 | Up to 1 MB |
Device Specific Handling
Reset
The J-Link software performs a device specific reset which ensures that the MCU is not halted after the boot ROM has been executed but before starting the user application code.
Evaluation Boards
- Analog Devices EV-ADuCM340ARDZ: http://wiki.segger.local/Analog_Devices_EV-ADuCM340ARDZ
Example Application
- Analog Devices EV-ADuCM340ARDZ: http://wiki.segger.local/Analog_Devices_EV-ADuCM340ARDZ#Example_Project