Difference between revisions of "ArteryTek AT32A40x"
(→Notes for use of SPIM external flash) |
|||
| Line 10: | Line 10: | ||
| Internal flash || 0x08000000 || 1024KB || style="text-align:center;"| {{YES}} |
| Internal flash || 0x08000000 || 1024KB || style="text-align:center;"| {{YES}} |
||
|- |
|- |
||
| − | | SPIM external flash || 0x08400000 || |
+ | | SPIM external flash || 0x08400000 || 16 MB || style="text-align:center;"| {{YES}} |
|} |
|} |
||
====Notes for use of SPIM external flash==== |
====Notes for use of SPIM external flash==== |
||
Revision as of 15:19, 20 February 2024
ArteryTek AT32A40x are Cortex-M4 based MCUs
Contents
Flash Banks
Internal Flash
| Flash Bank | Base address | Size | J-Link Support |
|---|---|---|---|
| Internal flash | 0x08000000 | 1024KB | 
|
| SPIM external flash | 0x08400000 | 16 MB |
|
Notes for use of SPIM external flash
- For the use of SPIM, the user has to take care, when setting up clocks, that AHB clock does not exceed 120 MHz.
- When clocks are not setup, J-Link sets core clock to 200 MHz and AHB clock to 100 MHz during SPIM flash programming.
- Only SPIM Type 2 / EN25QH128A is supported right now.
Watchdog Handling
- The watchdog is fed during flash programming.
Device Specific Handling
Reset
- The device uses normal Cortex-M reset, no special handling necessary, like described here.
