Difference between revisions of "ArteryTek AT32F41x"
Line 17: | Line 17: | ||
* Only SPIM Type 2 / EN25QH128A is supported right now. |
* Only SPIM Type 2 / EN25QH128A is supported right now. |
||
* SPIM may not be present on all devices of this device family. |
* SPIM may not be present on all devices of this device family. |
||
− | |||
==Watchdog Handling== |
==Watchdog Handling== |
Revision as of 15:22, 20 February 2024
ArteryTek AT32F41x are Cortex-M4 based MCUs
Contents
Flash Banks
Internal Flash
Flash Bank | Base address | Size | J-Link Support |
---|---|---|---|
Internal flash | 0x08000000 | Up to 256 KB | |
SPIM external flash | 0x08400000 | 16 MB |
Notes for use of SPIM external flash
- For the use of SPIM, the user has to take care, when setting up clocks, that AHB clock does not exceed 120 MHz.
- When clocks are not setup, J-Link sets core clock to 200 MHz and AHB clock to 100 MHz during SPIM flash programming.
- Only SPIM Type 2 / EN25QH128A is supported right now.
- SPIM may not be present on all devices of this device family.
Watchdog Handling
- The watchdog is fed during flash programming.
Device Specific Handling
Reset
- The device uses normal Cortex-M reset, no special handling necessary, like described here.