CC3220 LaunchPad

From SEGGER Wiki
Revision as of 18:53, 22 March 2018 by Erik (talk | contribs)
Jump to: navigation, search

The TI CC3220 LaunPad evaluation board does come with an on board debugger (XDS110) which drives the debug signals by default. In order to be able to connect with a J-Link to the CC3220SF device, the jumpers as shown on image below needs to be removed in order to isolate the on board debugger. The J-Link needs to be connected through the 9-pin Cortex-M connector (JTAG_IN).

  • SOP (J13) configured for JTAG
  • SOP (J13) configured for SWD
Retrieved from "https://wiki.segger.com/index.php?title=CC3220_LaunchPad&oldid=2504"