Difference between revisions of "CDC"
(→Accessing CDC on Linux) |
|||
Line 10: | Line 10: | ||
/dev/ttyACM0 or similar. "sudo screen /dev/ttyACM0 115200" |
/dev/ttyACM0 or similar. "sudo screen /dev/ttyACM0 115200" |
||
can be used to access the device. |
can be used to access the device. |
||
+ | |||
+ | [file:CDC_ACM_Linux.png] |
||
= Accessing CDC on Windows = |
= Accessing CDC on Windows = |
Revision as of 12:09, 26 June 2019
Communication Device Class - Abstract Control Model (CDC-ACM) This USB class is usually used for serial port emulation and as a modem interface. The class is also often used in combination with older software which previously used RS-232 to communicate with an external device.
Contents
Accessing CDC
Accessing CDC on Linux
On Linux no drivers are needed, the device should show up as /dev/ttyACM0 or similar. "sudo screen /dev/ttyACM0 115200" can be used to access the device.
[file:CDC_ACM_Linux.png]
Accessing CDC on Windows
On Windows 8.1 and below the "usbser" driver is not automatically assigned to the CDC-ACM device. To install the "usbser" driver see \Windows\USB\CDC . The device can be accessed via COM port emulation programs e.g. PuTTY.
Accessing CDC on macOS
On macOS no drivers are needed, the device should show up as /dev/tty.usbmodem13245678 or similar. The "screen" terminal program can be used to access the device.