Difference between revisions of "CDC"
(→Accessing CDC on Linux) |
(→Accessing CDC on Linux) |
||
| Line 11: | Line 11: | ||
can be used to access the device. |
can be used to access the device. |
||
| − | [file:CDC_ACM_Linux.png] |
+ | [[file:CDC_ACM_Linux.png]] |
= Accessing CDC on Windows = |
= Accessing CDC on Windows = |
||
Revision as of 12:10, 26 June 2019
Communication Device Class - Abstract Control Model (CDC-ACM) This USB class is usually used for serial port emulation and as a modem interface. The class is also often used in combination with older software which previously used RS-232 to communicate with an external device.
Contents
Accessing CDC
Accessing CDC on Linux
On Linux no drivers are needed, the device should show up as /dev/ttyACM0 or similar. "sudo screen /dev/ttyACM0 115200" can be used to access the device.
Accessing CDC on Windows
On Windows 8.1 and below the "usbser" driver is not automatically assigned to the CDC-ACM device. To install the "usbser" driver see \Windows\USB\CDC . The device can be accessed via COM port emulation programs e.g. PuTTY.
Accessing CDC on macOS
On macOS no drivers are needed, the device should show up as /dev/tty.usbmodem13245678 or similar. The "screen" terminal program can be used to access the device.
