ConfigTargetSettings()

Called before InitTarget(). Mainly used to set some global DLL variables to customize the normal connect procedure. For ARM CoreSight devices this may be specifying the base address of some CoreSight components (ETM, CTI, ...) that cannot be auto-detected by J-Link due to erroneous ROM tables etc. May also be used to specify the device name in case debugger does not pass it to the DLL.

_

_

Prototype

int ConfigTargetSettings(void);

Notes and Limitations

May not, under absolutely NO circumstances, call any API functions that perform target communication.

• Should only set some global DLL variables

Defining the JTAG chain

int ConfigTargetSettings(void) {
  JLINK_JTAG_DRPre  = 0;
  JLINK_JTAG_DRPost = 0;
  JLINK_JTAG_IRPre  = 0;
  JLINK_JTAG_IRPost = 0;
  JLINK_JTAG_IRLen  = 4;
  JLINK_JTAG_SetDeviceId(0, 0x1BB6402F);
  return 0;
}

Defining the AP map

int ConfigTargetSettings(void) { 
  JLINK_CORESIGHT_AddAP(0, CORESIGHT_AHB_AP);  // AP0
  JLINK_CORESIGHT_AddAP(1, CORESIGHT_AHB_AP);  // AP1
  JLINK_CORESIGHT_AddAP(2, CORESIGHT_APB_AP);  // AP2
  return 0;
}

Selecting a specific AP

int ConfigTargetSettings(void) { 
  JLINK_CORESIGHT_IndexAHBAPToUse = 0; // Select AP0 as AHB-AP
  JLINK_CORESIGHT_IndexAPBAPToUse = 2; // Select AP2 as APB-AP
  return 0;
}