Difference between revisions of "Debug session does not start"

From SEGGER Wiki
Jump to: navigation, search
(Created page with "Testcases which can be done if debug session does not start 1. Test your device with the J-Link Commander: * Create a *.hex file of your debug application using the IAR Outpu...")
 
Line 2: Line 2:
   
 
1. Test your device with the J-Link Commander:
  
1. Test your device with the J-Link Commander:
−
* Create a *.hex file of your debug application using the IAR Output Converter (EWARM project settings -> Output Converter)
 +
* Create a *.hex file of your debug application
−
* Start J-Link Commander with proper command line arguments: JLink.exe -device TMS570LS2134 -speed 4000
 +
* Start J-Link Commander with proper command line arguments: JLink.exe -device <DEVICE NAME> -speed 4000
−
* Enter the command: loadfile %IAR_PROJECT_DIR%\Output\output.hex
 +
* Enter the command: loadfile <PATH>\<FILENAME>.hex

Revision as of 16:16, 13 August 2015

Testcases which can be done if debug session does not start

1. Test your device with the J-Link Commander:

  • Create a *.hex file of your debug application
  • Start J-Link Commander with proper command line arguments: JLink.exe -device <DEVICE NAME> -speed 4000
  • Enter the command: loadfile <PATH>\<FILENAME>.hex
Retrieved from "https://wiki.segger.com/index.php?title=Debug_session_does_not_start&oldid=88"