View source for ESWIN EMU32VL170 TEST BRD

__TOC__

This article describes specifics for the ''ESWIN EMU32VL170 TEST BRD'' evaluation board.<br>
[[File:ESWIN_EMU32VL170_TEST_BRD_EMU32VL170_board.jpg|450px]]

== Preparing for J-Link ==
*Connect the J-Link to J88.
*Power the board via J91.
* Verify the Connection with e.g. [https://wiki.segger.com/J-Link_cannot_connect_to_the_CPU#Verify_functionality_using_J-Link_Commander J-Link Commander]. The output should look as follows:
[[File:ESWIN_EMU32VL170_TEST_BRD_EMU32VL170_connect.png|400px]]

== Example Project==
The following example project was created with the SEGGER Embedded Studio project wizard and runs out-of-the-box on the ESWIN EMU32VL170 TEST BRD.<br>It is a simple Hello World sample linked into the internal flash.<br>
====SETUP====
*J-Link software: V7.92h
*Embedded Studio: V7.20
*Hardware: ESWIN EMU32VL170 TEST BRD
*Link: [[File:ESWIN_EMU32Vl170._TestProject_ES_7V20.zip]]