Difference between revisions of "FE310"
| Line 8: | Line 8: | ||
* V6.36 (release) or later: [https://www.segger.com/downloads/jlink/#J-LinkSoftwareAndDocumentationPack Download latest release] |
* V6.36 (release) or later: [https://www.segger.com/downloads/jlink/#J-LinkSoftwareAndDocumentationPack Download latest release] |
||
'''Note:''' Currently only programming of the ISSI IS25LQ040B flash (the one mounted on the HiFive IoT eval board) is supported. |
'''Note:''' Currently only programming of the ISSI IS25LQ040B flash (the one mounted on the HiFive IoT eval board) is supported. |
||
| + | |||
| + | = Available eval boards = |
||
| + | The following eval boards that are based on the FE310 are available: |
||
| + | * SiFive HiFive IoT board |
||
<references/> |
<references/> |
||
Revision as of 12:42, 12 October 2018
The SiFive FE310 the first member of the "Freedom Everywhere family of customizable SoCs". It incorporates a SiFive E31 core which is based on the RISC-V architecture.
QSPI programming support
QSPI flash programming for this device is supported for the following versions:
- V6.35g (beta) or later: Download latest beta
- V6.36 (release) or later: Download latest release
Note: Currently only programming of the ISSI IS25LQ040B flash (the one mounted on the HiFive IoT eval board) is supported.
Available eval boards
The following eval boards that are based on the FE310 are available:
- SiFive HiFive IoT board
