Difference between revisions of "Flasher Hub-12"
(→Getting started) |
(Redirected page to UM08043 Flasher Hub-12) (Tag: New redirect) |
||
Line 1: | Line 1: | ||
+ | #REDIRECT [[UM08043_Flasher_Hub-12]] |
||
− | [[File: FlasherHub12.svg | thumb | SEGGER Flasher Hub-12]] |
||
− | |||
− | This is the user documentation for owners of a SEGGER Flasher Hub-12. |
||
− | |||
− | '''This article is work in progress.''' |
||
− | |||
− | |||
− | __TOC__ |
||
− | |||
− | = How Flasher Hub-12 works = |
||
− | |||
− | Flasher Hub-12 makes ultra-fast high speed parallel programming ("gang programming") with up to 12 channels possible. |
||
− | Flasher Hub-12 is connected to one or more modules (Flasher Compact). Each module is connected to a target chip. |
||
− | Using one of the Flasher Hub-12's host interfaces, flash programming operations can be triggered and responses from the Flasher Hub-12 can be read and evaluated. |
||
− | This makes the Flasher Hub-12 a perfect fit for small-scale as well as large-scale production environments. |
||
− | |||
− | = Getting started = |
||
− | |||
− | Before putting the Flasher Hub-12 into operation, make sure to have the following devices at hand: |
||
− | |||
− | * Power supply ([[#Power_supply |see below for more information]]) |
||
− | * One or more Flasher Compacts |
||
− | * Ethernet cable (not mandatory) |
||
− | * PC (Windows/ Linux/ macOS) |
||
− | * The Flasher Hub-12 is set up and good-to-go in less than 10 minutes |
||
− | |||
− | After making sure that the devices mentioned above are all available, the Flasher Hub-12 can be setup: |
||
− | |||
− | # Connect Flasher Hub-12 to power supply via the ''POWER'' connector |
||
− | # Connect Flasher Hub-12 to LAN via the ''LAN'' connector |
||
− | # Connect Flasher Compact(s) to Flasher Hub-12 via USB C |
||
− | # Download and install the most recent version of the Flasher software package |
||
− | #* https://www.segger.com/downloads/flasher/ |
||
− | # Make sure Flasher Hub-12 is running the most recent firmware, [[#Updating_Flasher_Hub-12_firmware | as described below]] |
||
− | # Open Flasher Hub-12's web interface by visiting http://flasherhub-<SerialNo>/ (Make sure to replace <SerialNo> with the serial number of your Flasher Hub-12) |
||
− | # Flasher Hub-12 is now up and running |
||
− | |||
− | = Power supply = |
||
− | |||
− | [[File: SEGGER_Flasher-Hub12_Host-Connector.png | 400px | float | right | Flasher Hub-12 back panel]] |
||
− | |||
− | Flasher Hub-12 is powered via the '''POWER''' connector on the back panel.<br> |
||
− | The power supply must be able to supply 8 - 30 V DC, max. 60 W to Flasher Hub-12. |
||
− | <br clear="all"> |
||
− | {{Note|1= |
||
− | * The power supply powers Flasher Hub-12 itself as well as all connected modules. |
||
− | * An insufficient power supply may lead to undefined behavior of Flasher Hub-12. |
||
− | }} |
||
− | |||
− | = Firmware update = |
||
− | |||
− | Firmware update files for both, Flasher Hub-12 as well as Flasher Compact modules are shipped with each new release of the Flasher software package. |
||
− | |||
− | == Updating Flasher Hub-12 firmware == |
||
− | |||
− | The Flasher Hub-12 firmware can up updated by using the Flasher software or by using Flasher Hub's web interface. |
||
− | |||
− | === Using Flasher software === |
||
− | |||
− | [[File: FlasherConfig_FH12FWUpdate.png | thumb | Flasher Hub-12 firmware update in Flasher Configurator]] |
||
− | |||
− | # Make sure to download and install the most recent version of the Flasher software package |
||
− | #* https://www.segger.com/downloads/flasher/ |
||
− | # Make sure Flasher Hub-12 is connected to a PC via USB or IP |
||
− | # Start Flasher Configurator (''FlasherConfig.exe'') |
||
− | # Right-click on Flasher Hub-12 |
||
− | # Click "''Update firmware''" |
||
− | # Flasher Configurator will now update the firmware of Flasher Hub-12 |
||
− | |||
− | <br clear="all"> |
||
− | |||
− | === Using Flasher Hub-12 web interface === |
||
− | |||
− | # Make sure to download and install the most recent version of the Flasher software package |
||
− | #* https://www.segger.com/downloads/flasher/ |
||
− | # Make sure Flasher Hub-12 is connected to LAN |
||
− | # Open Flasher Hub-12's web interface by visiting http://flasherhub-<SerialNo>/ (Make sure to replace <SerialNo> with the serial number of your Flasher Hub-12) |
||
− | # Navigate to ''Configuration'' > ''Flasher Hub'' |
||
− | # Next to ''Flasher Hub-12 firmware update'' click ''Choose file'' |
||
− | # Navigate to the installation folder of the Flasher software (e.g. ''C:\Program Files\SEGGER\Flasher'') |
||
− | # Inside the "''Firmwares''" folder, select the '''FlasherHub-12_V1.bin''' |
||
− | # Click ''Open'' |
||
− | # Click ''Upload'' |
||
− | # Wait for the firmware update file to be processed by Flasher Hub-12 |
||
− | # Reboot Flasher Hub to apply the firmware update |
||
− | <gallery mode="slideshow"> |
||
− | File: FH12_WebIF_Config_FH.png | Web interface ''Configuration'' > ''Flasher Hub'' |
||
− | File: FH12_WebIF_FWUpdate.png | Web interface firmware update file upload |
||
− | File: FH12_WebIF_SelectFW.png | Selection of Flasher Hub-12 firmware file |
||
− | File: FH12_WebIF_ProcessingFW.png | Flasher Hub-12 processing a firmware update file |
||
− | File: FH12_WebIF_FWUpdateReboot.png | Web interface following a successful firmware update file upload |
||
− | </gallery> |
||
− | |||
− | == Updating module firmware == |
||
− | |||
− | The firmware of modules connected to the Flasher Hub-12 can be updated as follows. |
||
− | |||
− | # Make sure to download and install the most recent version of the Flasher software package |
||
− | #* https://www.segger.com/downloads/flasher/ |
||
− | # Make sure Flasher Hub-12 is connected to LAN |
||
− | # Open Flasher Hub-12's web interface by visiting http://flasherhub-<SerialNo>/ (Make sure to replace <SerialNo> with the serial number of your Flasher Hub-12) |
||
− | # Navigate to ''Configuration'' > ''Flasher Hub'' |
||
− | # Next to ''Flasher firmware update'' click ''Choose file'' |
||
− | # Navigate to the installation folder of the Flasher software (e.g. ''C:\Program Files\SEGGER\Flasher'') |
||
− | # Inside the "''Firmwares''" folder, select the '''Flasher_Compact_V*.bin''' |
||
− | # Click ''Open'' |
||
− | # Click ''Upload'' |
||
− | # Wait for the firmware update file to be processed by Flasher Hub-12 |
||
− | # Navigate to ''Status'' |
||
− | # In the table below ''Module Status'', select the modules to apply the firmware update to |
||
− | # Click ''Update firmwares'' |
||
− | # |
||
− | |||
− | <gallery mode="slideshow"> |
||
− | File: FH12_WebIF_Config_FH.png | Web interface ''Configuration'' > ''Flasher Hub'' |
||
− | File: FH12_WebIF_ModFWUpdate.png | Web interface module firmware update file upload |
||
− | File: FH12_WebIF_SelectModFW.png | Selection of Flasher Hub-12 module firmware file |
||
− | File: FH12_WebIF_ProcessingModFW.png | Flasher Hub-12 processing a module firmware update file |
||
− | File: FH12_WebIF_UpdateMod.png | Web interface ''Status'' |
||
− | File: FH12_WebIF_ApplyingModFWUpdate.png | Web interface while module firmware update is applied |
||
− | </gallery> |
Latest revision as of 10:02, 26 October 2023
Redirect to: