Flasher Hub-12 - Module Configuration
Flasher Hub-12 allows to configure some options that affect the connected modules.
The configuration can be applied using the integrated web interface.
Contents
Position
A module position is the numerical value assigned to a module. It is used to identify the module in commands and responses of the terminal.
The method used to determine the position of a module depends on the mode in use.
Direct mode
By default, Flasher Hub-12 operates in direct mode. In direct mode, the position of a module is determined by the USB-C connector number that the module is connected to.
A module that is connected to USB-C connector #1 will be assigned module position #1.
A module that is connected to USB-C connector #2 will be assigned module position #2 and so on.
Flex mode
In flex mode, the module positions are not bound to the USB-C connectors in use.
A newly connected module is assigned the first module position that is free. The user can freely choose the positions of modules.
Once a module position is assigned (either by Flasher Hub-12 or by the user), that position is reserved for the respective module.
A reserved position will not be assigned to any module other than the one it is reserved for.
The user can instruct Flasher Hub-12 to "forget" a reserved module position. This frees up the module positions again.
Nickname
A nickname can be assigned to a module. The nickname serves as a display name for a module and does not fulfill any other functional purpose.
More information on Flashers' nickname feature can be found here: J-Link_Nickname Flasher Nickname .