View source for Geehy G32A1145 EVAL

__TOC__

This article describes specifics for the Geehy (Previously known as APEXMIC) G32A1145 EVAL evaluation board. It can be used to test & verify G32A1xx device support.

[[File:Geehy_G32A1145_EVAL.jpg|450px]]

== Minimum requirements ==
* J-Link software V7.94i or later

== Preparing for J-Link ==
*Connect the J-Link to the JTAG header (J14)
*Power the board via external power supply USB (J8)
* Verify the Connection with e.g. [https://wiki.segger.com/J-Link_cannot_connect_to_the_CPU#Verify_functionality_using_J-Link_Commander J-Link Commander]. The output should look as follows:

[[File:Geehy_G32A1145_Connect.jpg|400px]]