Geehy G32A1145 EVAL

From SEGGER Wiki
Revision as of 09:35, 7 February 2024 by Arne.kulinna (talk | contribs) (Created page with "__TOC__ This article describes specifics for the Geehy (Previously known as APEXMIC) G32A1145 EVAL evaluation board. It can be used to test & verify G32A1xx device support....")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

This article describes specifics for the Geehy (Previously known as APEXMIC) G32A1145 EVAL evaluation board. It can be used to test & verify G32A1xx device support.

Geehy G32A1145 EVAL.jpg

Minimum requirements

  • J-Link software V7.94i or later

Preparing for J-Link

  • Connect the J-Link to the JTAG header (J14)
  • Power the board via external power supply USB (J8)
  • Verify the Connection with e.g. J-Link Commander. The output should look as follows:

Geehy G32A1145 Connect.jpg

Retrieved from "https://wiki.segger.com/index.php?title=Geehy_G32A1145_EVAL&oldid=17660"