GigaDevice GD32307C-EVAL

This article describes specifics for the GigaDevice GD32307C-EVAL evaluation board.
450px

Preparing for J-Link

• Connect the J-Link to the JTAG header (JP1)
• Power the board via CN100.
• Verify the Connection with e.g. J-Link Commander. The output should look as follows:

Example Project

The following example project was created with the SEGGER Embedded Studio project wizard and runs out-of-the-box on the GigaDevice GD32307C-EVAL.
It is a simple Hello World sample linked into the internal flash.

SETUP

• Embedded Studio: V7.12a
• Hardware: GigaDevice GD32307C-EVAL
• Link: File:GigaDevice GD32330CB TestProject ES V712a.zip