GigaDevice GD32307C-EVAL
Revision as of 18:16, 8 March 2024 by Joshua.Kozian (talk | contribs) (Created page with "__TOC__ This article describes specifics for the GigaDevice GD32307C-EVAL evaluation board.<br> 450px == Preparing for...")
This article describes specifics for the GigaDevice GD32307C-EVAL evaluation board.
450px
Preparing for J-Link
- Connect the J-Link to the JTAG header (JP1)
- Power the board via CN100.
- Verify the Connection with e.g. J-Link Commander. The output should look as follows:
Example Project
The following example project was created with the SEGGER Embedded Studio project wizard and runs out-of-the-box on the GigaDevice GD32307C-EVAL.
It is a simple Hello World sample linked into the internal flash.
SETUP
- Embedded Studio: V7.12a
- Hardware: GigaDevice GD32307C-EVAL
- Link: File:GigaDevice GD32330CB TestProject ES V712a.zip