Difference between revisions of "GigaDevice GD32350R-EVAL"
(→Preparing for J-Link) |
|||
(One intermediate revision by the same user not shown) | |||
Line 1: | Line 1: | ||
__TOC__ |
__TOC__ |
||
− | This article describes specifics for the GigaDevice |
+ | This article describes specifics for the GigaDevice GD32350R-EVAL evaluation board.<br> |
[[File:GigaDevice_GD32350R-EVAL_GD32F350RB_board.jpg|450px]] |
[[File:GigaDevice_GD32350R-EVAL_GD32F350RB_board.jpg|450px]] |
||
Line 13: | Line 13: | ||
The following example project was created with the SEGGER Embedded Studio project wizard and runs out-of-the-box on the GigaDevice GD32350R-EVAL.<br>It is a simple Hello World sample linked into the internal flash.<br> |
The following example project was created with the SEGGER Embedded Studio project wizard and runs out-of-the-box on the GigaDevice GD32350R-EVAL.<br>It is a simple Hello World sample linked into the internal flash.<br> |
||
====SETUP==== |
====SETUP==== |
||
− | *Embedded Studio: |
+ | *Embedded Studio: V8.10a |
*Hardware: GigaDevice GD32350R-EVAL |
*Hardware: GigaDevice GD32350R-EVAL |
||
− | *Link: [[File: |
+ | *Link: [[File:GigaDevice_GD32F350RB_TestProject_ES_V810a.zip]] |
Latest revision as of 14:26, 3 April 2024
This article describes specifics for the GigaDevice GD32350R-EVAL evaluation board.
Preparing for J-Link
- Connect the J-Link to the JTAG header (JP3)
- Power the board via CN1.
- Verify the Connection with e.g. J-Link Commander. The output should look as follows:
Example Project
The following example project was created with the SEGGER Embedded Studio project wizard and runs out-of-the-box on the GigaDevice GD32350R-EVAL.
It is a simple Hello World sample linked into the internal flash.
SETUP
- Embedded Studio: V8.10a
- Hardware: GigaDevice GD32350R-EVAL
- Link: File:GigaDevice GD32F350RB TestProject ES V810a.zip