Difference between revisions of "GigaDevice GD32350R-EVAL"
(→Preparing for J-Link) |
(→SETUP) |
||
| Line 15: | Line 15: | ||
*Embedded Studio: V7.12a |
*Embedded Studio: V7.12a |
||
*Hardware: GigaDevice GD32350R-EVAL |
*Hardware: GigaDevice GD32350R-EVAL |
||
| − | *Link: [[File: |
+ | *Link: [[File:GigaDevice_GD32F350RB_TestProject_ES_V810a.zip]] |
Revision as of 15:29, 2 April 2024
This article describes specifics for the GigaDevice GD32F310C-EVAL evaluation board.
Preparing for J-Link
- Connect the J-Link to the JTAG header (JP3)
- Power the board via CN1.
- Verify the Connection with e.g. J-Link Commander. The output should look as follows:
Example Project
The following example project was created with the SEGGER Embedded Studio project wizard and runs out-of-the-box on the GigaDevice GD32350R-EVAL.
It is a simple Hello World sample linked into the internal flash.
SETUP
- Embedded Studio: V7.12a
- Hardware: GigaDevice GD32350R-EVAL
- Link: File:GigaDevice GD32F350RB TestProject ES V810a.zip
