GigaDevice GD32C1
Revision as of 16:07, 16 February 2024 by Torben.scharping (talk | contribs)
The GigaDevice GD32C1 series are 32-bit general-purpose microcontrollers based on the ARM Cortex-M4 processor.
Contents
Flash Banks
Internal Flash
| Flash Bank | Base address | Size | J-Link Support |
|---|---|---|---|
| Main flash | 0x08000000 | Up to 256 KB | 
|
| Information flash | 0x1FFFB000 | 128 KB | 
|
| Option Bytes | 0x1FFFF800 | 24 B |
|
| OTP | 0x1FFF7000 | 24 B |
|
On-Chip Memory Regions
The internal flash is divided into 4 different regions:
- Main Flash Block (0x08000000 - 0x0801FFFF)
- Information Block (0x1FFFB000 - 0x1FFFF7FF)
- Option bytes Block (0x1FFFF800 - 0x1FFFF80F)
- One-time program Block (0x1FFF7000 - 0x1FFF71FF)
For now, the Main Flash Block is supported, only.
Reset
No special reset is required.
Evaluation Boards
- GigaDevice GD32C113C-START: https://wiki.segger.com/GigaDevice_GD32C113C-START
Example Application
- GigaDevice GD32C113C-START: https://wiki.segger.com/GigaDevice_GD32C113C-START#Example_Project
