Difference between revisions of "IMX6UL-EVK"
(Created page with "In order to use the enable to pins of the JTAG connector of the IMX6UL-EVK eval board, the following resistors need to be desoldered: R1407, R1431-1434, and the following res...") |
(No difference)
|
Revision as of 15:43, 1 December 2016
In order to use the enable to pins of the JTAG connector of the IMX6UL-EVK eval board, the following resistors need to be desoldered: R1407, R1431-1434, and the following resistors need to be assembled: R1912-14, R1916
