Difference between revisions of "IMX6ULL-EVK"
(Created page with "In order to use the enable to pins of the JTAG connector of the IMX6ULL-EVK eval board, the following resistors need to be desoldered: *R1407 *R1431-1434") |
(Changed to use Template:Note) |
||
(4 intermediate revisions by 2 users not shown) | |||
Line 1: | Line 1: | ||
+ | ==Enable debugging via JTAG== |
||
In order to use the enable to pins of the JTAG connector of the IMX6ULL-EVK eval board, the following resistors need to be desoldered: |
In order to use the enable to pins of the JTAG connector of the IMX6ULL-EVK eval board, the following resistors need to be desoldered: |
||
*R1407 |
*R1407 |
||
*R1431-1434 |
*R1431-1434 |
||
+ | |||
+ | {{Note|This changes are only valid for revision one boards. You can recognize them by flipping the board around and the two stickers on the back must read this: |
||
+ | *700-28616 REV A1 |
||
+ | *SCH-28616 REV C1 |
||
+ | }} |
Latest revision as of 14:56, 18 October 2021
Enable debugging via JTAG
In order to use the enable to pins of the JTAG connector of the IMX6ULL-EVK eval board, the following resistors need to be desoldered:
- R1407
- R1431-1434
Note:
This changes are only valid for revision one boards. You can recognize them by flipping the board around and the two stickers on the back must read this:
- 700-28616 REV A1
- SCH-28616 REV C1