Difference between revisions of "IMX6ULL-EVK"
(Created page with "In order to use the enable to pins of the JTAG connector of the IMX6ULL-EVK eval board, the following resistors need to be desoldered: *R1407 *R1431-1434") |
(No difference)
|
Revision as of 18:38, 20 January 2017
In order to use the enable to pins of the JTAG connector of the IMX6ULL-EVK eval board, the following resistors need to be desoldered:
- R1407
- R1431-1434