Difference between revisions of "IMX6ULL-EVK"
(Created page with "In order to use the enable to pins of the JTAG connector of the IMX6ULL-EVK eval board, the following resistors need to be desoldered: *R1407 *R1431-1434") |
|||
Line 1: | Line 1: | ||
+ | ==Enable debugging via JTAG== |
||
In order to use the enable to pins of the JTAG connector of the IMX6ULL-EVK eval board, the following resistors need to be desoldered: |
In order to use the enable to pins of the JTAG connector of the IMX6ULL-EVK eval board, the following resistors need to be desoldered: |
||
*R1407 |
*R1407 |
Revision as of 09:45, 10 February 2017
Enable debugging via JTAG
In order to use the enable to pins of the JTAG connector of the IMX6ULL-EVK eval board, the following resistors need to be desoldered:
- R1407
- R1431-1434