IMX6ULL-EVK

From SEGGER Wiki
Revision as of 18:38, 20 January 2017 by Arne (talk | contribs) (Created page with "In order to use the enable to pins of the JTAG connector of the IMX6ULL-EVK eval board, the following resistors need to be desoldered: *R1407 *R1431-1434")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

In order to use the enable to pins of the JTAG connector of the IMX6ULL-EVK eval board, the following resistors need to be desoldered:

  • R1407
  • R1431-1434
Retrieved from "https://wiki.segger.com/index.php?title=IMX6ULL-EVK&oldid=807"