Infineon CY-SD2211

From SEGGER Wiki
Revision as of 10:52, 22 February 2024 by Torben.scharping (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

This article describes specifics for the Infineon CY-SD211 evaluation board.
Infineon CY-SD2211 Rev07 CYPD7291-68LDXS board.jpg

Preparing for J-Link

  • Connect the J-Link to J18:
    • GND on J18.2
    • SWDIO on J18.5
    • SWCLK on J18.4
    • Reset on J18.3
    • VTref on TP13
  • Power the board via J5.
  • Verify the Connection with e.g. J-Link Commander. The output should look as follows:

Infineon CY-SD2211 Rev07 CYPD7291-68LDXS connect.png

Example Project

The following example project was created with the SEGGER Embedded Studio project wizard and runs out-of-the-box on the Infineon CY-SD2211.
It is a simple Hello World sample linked into the internal flash.

SETUP

Retrieved from "https://wiki.segger.com/index.php?title=Infineon_CY-SD2211&oldid=17929"