Difference between revisions of "Infineon S25Hx256T / S25Hx512T / S25Hx01GT serial flash"
(→Reconfigure Cypress S25Hx256T / S25Hx512T / S25Hx01GT serial flash to 256kByte sector size) |
|||
| Line 1: | Line 1: | ||
| − | J-Flash SPI supports only SPI Flashes with uniform sector sizes. By default the |
+ | J-Flash SPI supports only SPI Flashes with uniform sector sizes. By default the Infineon S25Hx256T/512T/01GT has a hybrid sector architecture. |
Therefore you need to set the configuration bit 3 UNHYSA within CFR3x register. |
Therefore you need to set the configuration bit 3 UNHYSA within CFR3x register. |
||
__TOC__ |
__TOC__ |
||
| − | = Reconfigure |
+ | = Reconfigure Infineon S25Hx256T / S25Hx512T / S25Hx01GT serial flash to 256kByte sector size = |
The following initsteps show how to reconfigure the serial flash to the supported 256kByte sector size within J-Flash SPI. |
The following initsteps show how to reconfigure the serial flash to the supported 256kByte sector size within J-Flash SPI. |
||
Revision as of 18:23, 10 February 2022
J-Flash SPI supports only SPI Flashes with uniform sector sizes. By default the Infineon S25Hx256T/512T/01GT has a hybrid sector architecture. Therefore you need to set the configuration bit 3 UNHYSA within CFR3x register.
Contents
Reconfigure Infineon S25Hx256T / S25Hx512T / S25Hx01GT serial flash to 256kByte sector size
The following initsteps show how to reconfigure the serial flash to the supported 256kByte sector size within J-Flash SPI.
