J-Link-OB-K22-SiFive
This article describes specifics of the J-Link OB K22 SiFive.
Contents
WebUSB support
The J-Link OB K22 SiFive supports WebUSB for firmware build compiled Jul 30 2019 12:24:12 (delivered with V6.48a of the J-Link software) and later. By default, WebUSB support is not enabled on the Ob and needs to be enabled per one-time setup. In the following, it is assumed that it is already known what WebUSB is and what it can be used for. For more information, please refer to the WebUSB wiki article.
Enabling WebUSB
In order to enable WebUSB, J-Link Commander needs to be started and the "WebUSBEnable" command needs to be executed:
After power-cycling the J-Link OB, it will be listed as a WinUSB device in the device manager: