Difference between revisions of "J-Link command strings"
(Created page with "The behavior of the J-Link can be customized via command strings. The recommend way to execute J-Link command strings is to <br> a) add them to a J-Link script files |J-Link...") |
(No difference)
|
Revision as of 17:34, 5 October 2017
The behavior of the J-Link can be customized via command strings.
The recommend way to execute J-Link command strings is to
a) add them to a J-Link script file for repetitive use, e.g. on debug session start.
b) execute them via the J-Link Control Panel (https://wiki.segger.com/Generic_IDE#Using_J-Link_command_strings) for single use.
For further information regarding J-Link command strings, please refer to UM08001
