Difference between revisions of "LAUNCHXL CC2650"
(→Connecting via J-Link) |
|||
(One intermediate revision by one other user not shown) | |||
Line 1: | Line 1: | ||
+ | [[Category:Evalboards]] |
||
The TI LAUNCHXL CC2650 evaluation board does come with an on board debugger which drives the debug signals by default. |
The TI LAUNCHXL CC2650 evaluation board does come with an on board debugger which drives the debug signals by default. |
||
Line 6: | Line 7: | ||
In order to connect to the LAUNCHXL CC2650 board via J-Link the following jumpers must be '''open''': |
In order to connect to the LAUNCHXL CC2650 board via J-Link the following jumpers must be '''open''': |
||
+ | *RESET |
||
− | *TCK |
||
*TMS |
*TMS |
||
+ | *TCK |
||
*TDI |
*TDI |
||
*TDO |
*TDO |
||
*SWO |
*SWO |
||
− | *RESET. |
||
Otherwise the on board debugger by TI interferes with J-Link. |
Otherwise the on board debugger by TI interferes with J-Link. |
Latest revision as of 14:38, 15 May 2024
The TI LAUNCHXL CC2650 evaluation board does come with an on board debugger which drives the debug signals by default.
Connecting via J-Link
In order to connect to the LAUNCHXL CC2650 board via J-Link the following jumpers must be open:
- RESET
- TMS
- TCK
- TDI
- TDO
- SWO
Otherwise the on board debugger by TI interferes with J-Link.