Difference between revisions of "LAUNCHXL CC2650"
(→Connecting via J-Link) |
|||
| Line 6: | Line 6: | ||
In order to connect to the LAUNCHXL CC2650 board via J-Link the following jumpers must be '''open''': |
In order to connect to the LAUNCHXL CC2650 board via J-Link the following jumpers must be '''open''': |
||
| + | *RESET |
||
| − | *TCK |
||
*TMS |
*TMS |
||
| + | *TCK |
||
*TDI |
*TDI |
||
*TDO |
*TDO |
||
*SWO |
*SWO |
||
| − | *RESET. |
||
Otherwise the on board debugger by TI interferes with J-Link. |
Otherwise the on board debugger by TI interferes with J-Link. |
||
Latest revision as of 18:14, 3 July 2018
The TI LAUNCHXL CC2650 evaluation board does come with an on board debugger which drives the debug signals by default.
Connecting via J-Link
In order to connect to the LAUNCHXL CC2650 board via J-Link the following jumpers must be open:
- RESET
- TMS
- TCK
- TDI
- TDO
- SWO
Otherwise the on board debugger by TI interferes with J-Link.
