Difference between revisions of "LAUNCHXL CC2650"
(Created page with " The TI LAUNCHXL CC2640R2 evaluation board does come with an on board debugger which drives the debug signals by default. == Connecting via J-Link == In order to connect to...") |
|||
Line 1: | Line 1: | ||
− | The TI LAUNCHXL |
+ | The TI LAUNCHXL CC2650 evaluation board does come with an on board debugger which drives the debug signals by default. |
== Connecting via J-Link == |
== Connecting via J-Link == |
Revision as of 17:25, 3 July 2018
The TI LAUNCHXL CC2650 evaluation board does come with an on board debugger which drives the debug signals by default.
Connecting via J-Link
In order to connect to the LAUNCHXL CC2650 board via J-Link the following jumper must be open: TCK, TMS, TDI, TDO, SWO, RESET.
Otherwise the on board debugger by TI interferes with J-Link.