LPC845

From SEGGER Wiki
Revision as of 13:49, 29 April 2019 by Nino (talk | contribs) (MTB Trace)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Contents

MTB Trace

For the LPC84x series, MTB support was implemented by NXP in a non-standard way so that various things like CoreSight auto-detection of MTB and its buffer are not possible. The J-Link software worksaround this and still gives the user a out-of-the-box experience when using MTB trace on this device. J-Link software V6.46 or later is required to use MTB on this device series.

A sample project that demonstrates MTB backtrace via Ozone on this device can be found here: Trace Example