Difference between revisions of "LPCXpresso4337 V3"
(Created page with "==Enable debugging via SWD== In order to use the J-Link to debug the LPC4337 on the board, the following changes needs to be done: *Remove JP1 *Manually connect Pin1 of the SW...") |
|||
(2 intermediate revisions by one other user not shown) | |||
Line 1: | Line 1: | ||
+ | [[Category:Evalboards]] |
||
− | ==Enable debugging via SWD== |
||
+ | ==Enable Debugging via SWD== |
||
In order to use the J-Link to debug the LPC4337 on the board, the following changes needs to be done: |
In order to use the J-Link to debug the LPC4337 on the board, the following changes needs to be done: |
||
*Remove JP1 |
*Remove JP1 |
||
*Manually connect Pin1 of the SWD debug connector (P1) to 3.3V (VTref) |
*Manually connect Pin1 of the SWD debug connector (P1) to 3.3V (VTref) |
||
+ | *Connect the J-Link to the target using the SWD debug connector (P1) |
Latest revision as of 13:18, 15 May 2024
Enable Debugging via SWD
In order to use the J-Link to debug the LPC4337 on the board, the following changes needs to be done:
- Remove JP1
- Manually connect Pin1 of the SWD debug connector (P1) to 3.3V (VTref)
- Connect the J-Link to the target using the SWD debug connector (P1)