Difference between revisions of "LPCXpresso4337 V3"
(Created page with "==Enable debugging via SWD== In order to use the J-Link to debug the LPC4337 on the board, the following changes needs to be done: *Remove JP1 *Manually connect Pin1 of the SW...") |
(→Enable debugging via SWD) |
||
| Line 1: | Line 1: | ||
| − | ==Enable |
+ | ==Enable Debugging via SWD== |
In order to use the J-Link to debug the LPC4337 on the board, the following changes needs to be done: |
In order to use the J-Link to debug the LPC4337 on the board, the following changes needs to be done: |
||
*Remove JP1 |
*Remove JP1 |
||
Revision as of 19:05, 10 February 2017
Enable Debugging via SWD
In order to use the J-Link to debug the LPC4337 on the board, the following changes needs to be done:
- Remove JP1
- Manually connect Pin1 of the SWD debug connector (P1) to 3.3V (VTref)
