Difference between revisions of "LPCXpresso4337 V3"
(→Enable debugging via SWD) |
|||
| Line 3: | Line 3: | ||
*Remove JP1 |
*Remove JP1 |
||
*Manually connect Pin1 of the SWD debug connector (P1) to 3.3V (VTref) |
*Manually connect Pin1 of the SWD debug connector (P1) to 3.3V (VTref) |
||
| + | *Connect the J-Link to the target using the SWD debug connector (P1) |
||
Latest revision as of 19:06, 10 February 2017
Enable Debugging via SWD
In order to use the J-Link to debug the LPC4337 on the board, the following changes needs to be done:
- Remove JP1
- Manually connect Pin1 of the SWD debug connector (P1) to 3.3V (VTref)
- Connect the J-Link to the target using the SWD debug connector (P1)
