Difference between revisions of "MT2523 LinkIt Board"
(Created page with "___TOC___ The MediaTek MT2523 LinkIt board is designed as a starting platform for evaluating the MediaTek MT2523 series devices") |
(→On-board debug probe) |
||
(5 intermediate revisions by the same user not shown) | |||
Line 1: | Line 1: | ||
+ | __TOC__ |
||
− | ___TOC___ |
||
The MediaTek MT2523 LinkIt board is designed as a starting platform for evaluating the [[MT2523 series|MediaTek MT2523 series devices]] |
The MediaTek MT2523 LinkIt board is designed as a starting platform for evaluating the [[MT2523 series|MediaTek MT2523 series devices]] |
||
+ | |||
+ | = On-board debug probe = |
||
+ | The MT2523 LinkIt board incorporates a on-board OpenSDA debug probe which can be converted to a J-Link on-board as described [https://www.segger.com/products/debug-probes/j-link/models/other-j-links/opensda-sda-v2/ here] |
||
+ | |||
+ | '''Notes''' |
||
+ | * Please select from "J-Link OpenSDA - Generic Firmwares" the one for "OpenSDA V2 Bootloader" |
||
+ | * For debugging via OpenSDA on this board, min. V6.35h (beta) or V6.36 (release) of the J-Link software are required |
||
+ | |||
+ | [[File:Mediatek MT2523 LinkIt Board.png|MT2523 LinkIt Board|thumb|none]] |
Latest revision as of 16:49, 24 October 2018
Contents
The MediaTek MT2523 LinkIt board is designed as a starting platform for evaluating the MediaTek MT2523 series devices
On-board debug probe
The MT2523 LinkIt board incorporates a on-board OpenSDA debug probe which can be converted to a J-Link on-board as described here
Notes
- Please select from "J-Link OpenSDA - Generic Firmwares" the one for "OpenSDA V2 Bootloader"
- For debugging via OpenSDA on this board, min. V6.35h (beta) or V6.36 (release) of the J-Link software are required