Difference between revisions of "MT2523 series"
(→J-Link QSPI support) |
(→Example eval boards) |
||
(One intermediate revision by the same user not shown) | |||
Line 14: | Line 14: | ||
Unfortunately, the watchdog of the MT2523 series devices keeps running while the core is halted / in debug mode, which makes it impossible to debug the device with watchdog enabled. Therefore, when establishing a debug connection to the device, J-Link disables the watchdog as part of the connect sequence. |
Unfortunately, the watchdog of the MT2523 series devices keeps running while the core is halted / in debug mode, which makes it impossible to debug the device with watchdog enabled. Therefore, when establishing a debug connection to the device, J-Link disables the watchdog as part of the connect sequence. |
||
+ | = Example eval boards = |
||
+ | [[MT2523_LinkIt_Board|MT2523 LinkIt board]] |
||
<references/> |
<references/> |
Latest revision as of 16:44, 24 October 2018
The MediaTek 2523 series is designed for wearables. It incorporates a Cortex-M4 and an in-package/on-chip QSPI flash.
J-Link debugging support
J-Link supports the MediatTek 2523 series since the following J-Link software versions:
- V6.35h (beta) or later: Download latest beta
- V6.36 (release) or later: Download latest release
J-Link QSPI support
Watchdog
Unfortunately, the watchdog of the MT2523 series devices keeps running while the core is halted / in debug mode, which makes it impossible to debug the device with watchdog enabled. Therefore, when establishing a debug connection to the device, J-Link disables the watchdog as part of the connect sequence.