MindMotion EVB-L0136

From SEGGER Wiki
Revision as of 19:30, 27 March 2023 by Torben.scharping (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

This article describes specifics for the MindMotion EVB-L0136 evaluation board.
[PICTURE OF BOARD] 450px

Preparing for J-Link

  • Connect the J-Link to CN7.
  • Power the board via CN1.
  • Verify the Connection with e.g. J-Link Commander. The output should look as follows:

MindMotion EVB-L0136 MM32L0136C7P connect.png

Example Project

The following example project was created with the SEGGER Embedded Studio project wizard and runs out-of-the-box on the MindMotion EVB-L0136 .
It is a simple Hello World sample linked into the internal flash.

SETUP

Retrieved from "https://wiki.segger.com/index.php?title=MindMotion_EVB-L0136&oldid=14596"