The Mindmotion MM32F5270 and MM32F5280 microcontroller is based on ARM®STAR-MC1 processor. Built-in
L1 ICache, DCache, instruction tightly coupled memory ITCM and data tightly coupled memory DTCM,
with high performance and low power consumption.
Supported Flash Banks
Internal Flash
Device |
StartAddr |
Size |
J-Link Support
|
MM32F5233 |
0x08000000 |
128 KB |
YES
|
MM32F5277 |
0x08000000 |
256 KB |
YES
|
MM32F5287 |
0x08000000 |
256 KB |
YES
|
QSPI flash
Device |
StartAddr |
Size |
J-Link Support
|
MM32F5277 |
0x90000000 |
External, up to 256MB |
YES
|
MM32F5287 |
0x90000000 |
In package, 1024/2048KB |
YES
|
Option Byte
Device |
StartAddr |
Size |
J-Link Support
|
MM32F5233 |
0x1FFFF800 |
512 Byte |
YES
|
MM32F5277 |
0x1FFFF800 |
512 Byte |
YES
|
MM32F5287 |
0x1FFFF800 |
512 Byte |
YES
|
*** Additional information ***
- Pay attention, for debug and flash program support maximum CPU Frequency is 96 MHz.
- After erasing the option byte on MM32F5233 devices, the correct boot address has to be programmed at BOOT_ADDR.
Reset
The device uses normal reset, no special handling necessary.
Minimum requirements
- J-Link software V7.92d or later
Evaluation Boards
Example Application